NEXUS Software Updates & Instructions

1. Record Drive Speed Values
   • Before updating NEXUS, always document all current Drive Speed values found in Drive Calibration menu. This is usually easiest by taking a photo of this menu. 
2. Updating Software
   • Download the newest file from the software table below. Place this .update file on a USB drive at the highest level of the USB (not inside any folders). 
   • Insert the USB drive into the USB port near the touchscreen. The update will start automatically. 
   • A reboot prompt will appear. Press OK and the machine will power-cycle. 
   • Once the power-cycle is complete, the software update will be confirmed complete. This can also be verified by checking the software version number on the main menu in the lower left-hand corner. .
3. Verify Drive Speed Values
   • Return to Drive Calibration and verify the Drive Speed values have not changed. Manually adjust them to the original values, if needed. 

To email this page, click here. 

PRO TIP - It's a great idea to bookmark this page on your computer for your convenience. 

Last Update: 04/20/2026